96V battery Bank Voltage( No. of batteries depends on the backup time)
PV Array Voltage Range:
AC Input Voltage Range:
145V~275VAC (Bypass Function)
AC Charger Current:
Load Power (W):
Solar Power (W):
Output Voltage (V):
50 Set/Sets per Week
Packaging & Delivery
GTP series Solar Inverter adopted the most advanced technology and the latest net-work communication technology of United States, giving a perfect power solution for your restrict requirements. It is small, intelligent and high efficiency. In inverter state, it is almost no noise. GTP integrated with PWM technology, and its inverter voltage is fully sine wave output, suitable for capacitive load, inductive load and nonlinear mixed load. Also, its efficiency is 10% higher than that of other inverters; protection functions are perfect, such as overload, short circuit, battery voltage over high or over low, these will not cause your machine breakdown. By RS232 communication port, the inverter and power status could be monitored from the connected PC, to understand the working data, setting inverter off, monitoring the working parameters, and to expand functionality for remote network monitoring (via SNMP ADAPTER). It can meet a variety of solar power systems.
Intelligent CPU control
Efficient inverter technology design
Automatic stable voltage output
Over high or over low voltage input & output protection
230VAC50HZ automatically detect the output conversion
RS232 communication monitoring interface
INTERNET-FAX-MODEM-ADSL line surge lighting protection
Wide input voltage
Overload/ over temperature output protection
LED light/LCD display and alarm buzzer
Light designed, beautiful and durable
3.Product Appearance (front and back shown)
The solar inverter will be used in a solar system, which is including solar panels, solar inverter, solar controller and battery. In this system, the output mode is inverter priority (battery priority). When battery voltage is low, it will switch to mains output mode, and continue to drive the loads.
The inverter with AC charger, when inverters switch to bypass mode, solar charge controller and AC charger charge the battery at the same time. AC charger current is 1A-20A. It is made to protect the battery, prevent the battery to be empty. So the battery is mainly charging by controller all the time.
Open the package and you will find:
1 set inverter;
Product warranty card;
RS232 line connection and monitoring software CD (which is optional accessory)
Caution: opening the package, please double-check whether the machine is damaged in transit, if damaged, do not start the machine or repair it.
Indoor use and more than 2.5 cm should be left around the room for air circulation
avoid direct sunlight
avoid humidity or liquid
6.3 Battery installation
Connect the battery with an external battery connection jack (labeled EXT BATTERY),
the other end of the external battery cable box connected to the battery junction box,
connector models refer to the table below:
Attention: Sparkle during connection is normal
6.4 Mains connection
Input connected to the single-phase three-wire inverter with a ground connection rafts, to avoid connection with an extension and conversion.
6.5 Battery charging
Right to the battery as long as the inverter, the rated voltage electricity access, in order to take full advantage of battery, charge for 12 hours before using.
Note: If the inverter unused for a long time, please charge for 24 hours every.
6.6 Connecting to loadings
After the load plate into output sockets of the inverter's back board, if inverter use as a master control switch, set all load switch open.
1) Power on
Inverter well-connected, press the "ON" button, when hear the buzzer called 4 times, the inverter is launched and can supply power to the load.
2) Power off
Press the OFF button to switch off the inverter. The inverter use the open key as the master switch of the device protection. This is very convenient.
Notice: when there is electricity and the inverter's input power cords insert into the outlet, the inverter already work.
3) LCD display various states of the inverter. (As shown)
ØWhen inverter is in normal state, the load is powered from the inverter:
The LCD display frequency and output voltage and percent of battery
ØWhen the battery is discharged and change to the bypass state:
The LCD display input/output ac voltage, percent of battery and percent of loads
ØWhen user don't want alarm sound, please set it with the Real Silent Button
Packaging & Shipping
1. FedEx/DHL/UPS/TNT for samples, Door-to-Door;
2. By Air or by Sea for batch goods, for FCL; Airport/ Port receiving;
3. Customers specifying freight forwarders or negotiable shipping methods!
4. Delivery Time: 5workdays for samples; 15 workdays for batch goods.
1. We are Alibaba Assessed Gold Supplier,Popular Supplier.
2.100% QC inspection Before Shippment.
3. CE certificated,competitve price. 4. 7*24 online EMAIL service!
Add: Petroleum Mansion, Food Street 1,Zhangjiagang City, Jiangsu,P.R. of China
Zhangjiagang Great-Trust New Energy Technology Co., Ltd.
Q1.Are you a factory or trading company?
We have two modern factory. We have 120 factory workers and 10 of them are quality control and engineer guys. Welcome to visit our factory.
Q2. Is Your products the lowest price?
GT take the quality into consideration prior. The price is based on the quality level and the order quantity. We have different quality level products for buyers option and discount is available from us when the order is big.
Q3. All products have a warranty?
Yes, we supply 1 to 25 years warranty for our products. You will be satisfied with our quality.
Q4. Can we add our logo on products?
Yes, there are several ways to do this. We can put the label of your logo on the products or make the silk print of your logo on the products. It is free.
Q5. can we customize product?
OEM and ODM are welcomed from GT. We have rich experiences in this area.